Caring for your home’s septic system is actually easier than you think. Do it right and you can save a lot of money down the line. A septic safe drain cleaner can make the task easier, but it’s also important to keep the system problem-free in the first place.
Because a septic system treats the water coming from the plumbing system, it is prone to problems and will require septic tank treatment. Follow these steps to keep it healthy and problem-free:
1. Understand how it works
Find out what type of septic system you have and where it is so you can determine the proper maintenance strategies to use. This will also help you pick the right septic safe drain clog remover should you need to treat blocked drains in your house.
2. Routinely inspect and pump the system
It’s advisable to get your septic system inspected at least every three years. You will need a professional to do that. Septic pumping should also be routinely performed every three to five years to flush it out and remove remnants of solid waste. The frequency of pumping will depend on the amount of wastewater generation, level of use, tank size, and amount of solids. This is also a good time for a professional to inspect the system for problems such as leaks.
Most homeowners put off inspection and pumping until the septic system starts backing up in their drains and toilets. Don’t make this mistake. Prevent backup using Septic Treatment Powder. A septic tank formulation with biologicals and digestive enzymes to break down paper and household waste. The healthy bacteria eat the buildup from soap scum, grease, hair, organic matter, and paper. Apply once a month to prevent slow drains.
3. Practice proper waste disposal
You can reduce the need for professional septic tank treatment with proper waste disposal practices. Keep in mind that toilets, shower drains, and garbage disposals are not trash cans. What you put in them ultimately goes into the septic tank and can cause problems. Liquid Rhyno Build-Up Remover is a septic safe drain cleaner you can use in case there is buildup in your drains. Use it once a month to prevent clogs.
4. Ensure water efficiency
The average single-family home typically uses 70 gallons of water per individual every day according to the EPA. The toilet can consume as much as 200 gallons of wastewater daily. This is why it’s important to take steps to conserve water to keep your septic system healthy. Try to install high-efficiency plumbing fixtures and consider doing smaller loads of laundry throughout the week instead of one big load.
5. Keep your drain field in good condition
The drain field eliminates contaminants from liquid that emerges from a septic tank. Avoid driving or parking, planting, or placing anything on top of it. You should also avoid placing roof drains and rainwater drainage systems nearby.